

K33850 Existent Gum Steam Generator

Test Method
Gum formed during fuel storage can deposit on induction system surfaces, intake valves, stems and guides. To test for gum content, a 50mL sample is evaporated in an aluminum block bath for a specified period under controlled conditions of temperature and flow of air (aviation and motor gasolines) or steam (aircraft turbine fuel).
Features and Benefits
- For steam-jet method testing of aircraft turbine fuels
- Meets output requirements of three-unit and six-unit evaporation baths
- Electrically heated for clean, efficient operation and ease of installation
- Meets applicable ASME, NEC standards; UL listed, CSA approved
K33850 Existent Gum Steam Generator
Electrically heated boiler provides instantaneous and reserve steam capacity for steam-jet evaporation tests. Easy to install and operate; electrical heating eliminates the need for on-site fuel combustion. Requires only a water feed source and electrical hook-up. Ruggedly constructed, with long life industrial grade incoloy heating element. Includes a full range of safety features: automatic water level control and low water cut-off; steam safety valve; high-limit pressure cut-out with manual reset; steam pressure gauge.
Specifications
Output: 54.1 lbs steam/hr. 212°F
Bhp Rating: 1.83
kW Rating: 18
Dimensions lxwxh,in.(cm)
20x28x36 (51x71x91)
Net Weight: 185 lbs (83kg)
Shipping Information
Shipping Weight: 200 lbs (91kg)
Dimensions: 18 Cu. ft.
Ordering Information
| Catalog Number |
Product Description | Electrical Requirements |
| K33850/208601 | Steam Boiler | 208V 60Hz, Single Phase, 87A |
| K33850/208603 | Steam Boiler | 208V 60Hz, Three Phase, 50A |
| K33850/240601 | Steam Boiler | 240V 60Hz, Single Phase, 75A |
| K33850/240603 | Steam Boiler | 240V 60Hz, Three Phase, 43A |
| K33850/380603 | Steam Boiler | 380V 50/60Hz, Three Phase, 27A |
| K33850/415503 | Steam Boiler | 415V 50Hz, Three Phase, 25A |
| K33850/480503 | Steam Boiler | 480V 60Hz, Three Phase, 22A |
Accessories
| Catalog Number |
Product Description |
| K33810 | Steam Superheater Provides dry superheated steam for evaporation baths not equipped with a built-in superheater. Use together with an outside steam source for steam-jet method testing of aircraft turbine fuels. Superheating chamber and condensate trap are constructed entirely of stainless steel. Solid state temperature controller adjusts between 0-550°F. Equipped with steam inlet and outlet connections and condensate drain valve. Steel exterior has a chemical resistant polyurethane enamel finish. Dimensions 5x27x91/2″ (13x70x24cm). Shipping Weight: 23 lbs (10.4kg) 220-240V 50/60Hz, Single Phase, 6.8A |
| K33710 | Sample Beaker, 100mL spun copper, 50x78mm |
| 332-002-017 | Sample Beaker, Pyrex™, 100mL |
| 250-000-03F | ASTM 3F Thermometer Range: 20 to 760°F |
| 250-000-03C | ASTM 3C Thermometer Range: –5 to +400°C |
When inquiring about NIST traceable certified thermometers, please refer to the catalog number for the corresponding thermometer and replace the middle three zeros in the catalog number with 004. Example: 251-000-01C ASTM 1C Thermometer would be 251-004-01C ASTM 1C Certified Thermometer.















